DID Chain
- Premium DID Chain Finished in Unplated SteelÂ
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
- Premium DID Chain
- Gold & Gold Finish (inner and outer)
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Cagiva | 650 Alazzurra Sports | 1985-1988 |
| Honda | CB400 A Hondamatic - USA | 1978 |
| Honda | CB400 N,NA | 1979-1980 |
| Honda | CB400 T Hawk - USA | 1980 |
| Honda | CB400 T Hawk - USA | 1981 |
| Honda | CB400 T Mk I/II - USA | 1978-1979 |
| Honda | CB400 T,AT - Germany | 1978-1979 |
| Honda | CB400 T,AT | 1978-1979 |
| Honda | CB450 DXK | 1989-1992 |
| Honda | CB450 NF (PC14) | 1985 |
| Honda | CB450 Night Hawk | |
| Honda | CB450 T Hawk - USA | 1982 |
| Honda | CB500 F Four | 1972-1977 |
| Honda | CB500 F1 | |
| Honda | CB500 K1,K2,K3 | 1972-1974 |
| Honda | CB550 F1,F2,K1,K2,K3 (4 Cylinders) | 1975-1980 |
| Honda | CJ250 T | 1976-1979 |
| Honda | CM400 T-A Chopper (NC01) | 1979-1980 |
| Honda | FT500 Ascot - USA | 1982-1983 |
| Honda | FT500 C (PC07) | 1982-1984 |
| Kawasaki | GPZ305 (EX305A1) | 1983 |
| Kawasaki | GPZ550 (Z550D1) Twin Shock | 1981 |
| Kawasaki | KZ305 A1,A2 (CSR) - USA | 1981-1982 |
| Kawasaki | KZ400 A1/A2(Deluxe) - USA | 1977-1978 |
| Kawasaki | KZ400 B1,B2 - USA | 1978-1979 |
| Kawasaki | KZ400 C1 - USA | 1978 |
| Kawasaki | KZ400 D1,D2,D3,D4 - USA | 1974-1977 |
| Kawasaki | KZ400 S1,S2,S3 - USA | 1975-1977 |
| Kawasaki | KZ440 B1,B2 - USA | 1980-1981 |
| Kawasaki | KZ550 A1-A4 - USA | 1980-1983 |
| Kawasaki | KZ550 C1-C4 (LTD) - USA | 1980-1983 |
| Kawasaki | KZ550 D1 (GPz) - USA | 1981 |
| Kawasaki | Z400 B1-B2,G1,H,LTD (2 Cyl) | 1978-1980 |
| Kawasaki | Z400 D1-D4 (2 Cyl) | 1974-1979 |
| Kawasaki | Z400 J1-J3 (4 Cyl) (KZ400J) | 1980-1983 |
| Kawasaki | Z440 C1/2 - Germany | 1980-1981 |
| Kawasaki | Z500 B1-B2 | 1979-1980 |
| Kawasaki | Z500 B3 (6 Speed) | 1981 |
| Kawasaki | Z550 A1-A3 | 1980-1983 |
| Kawasaki | Z550 B1-B2 | 1979-1980 |
| Kawasaki | Z550 C1-C3,LTD | 1981-1983 |
| Yamaha | XS250 - France | |
| Yamaha | XS250 Alloy Wheel | 1978 |
| Yamaha | XS250 RK,SK - Australia | 1982 |
| Yamaha | XS360 C/D/2D - USA | 1976-1977 |
| Yamaha | XS400 J,K - USA | 1982-1983 |
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Standard motorcycle roller chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Unplated steel motorcycle drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. DID 415 S is affordable, durable and reliable making it the leading choice in the motorcycle industry for light applications.
Features:
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation
- Combines excellent quality with low cost
- Premium DID Chain Finished in Unplated SteelÂ
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| BMW | 1000 HP4 | 2013-2015 |
| BMW | S1000 RR (K46) | 2009-2011 |
| BMW | S1000 RR Sport | 2010 |
| BMW | S1000 RR | 2012-2018 |
| Ducati | 1198 Diavel AMG | 2012 |
| Ducati | 1198 Diavel Carbon | 2011-2018 |
| Ducati | 1198 Diavel Cromo | 2012-2014 |
| Ducati | 1198 Diavel Dark | 2013 |
| Ducati | 1198 Diavel Strada | 2013-2015 |
| Ducati | 1198 Diavel Titanium | 2016 |
| Ducati | 1198 Diavel | 2011-2018 |
| Honda | CB600 F-7,8,9,A,B,C,D Hornet (PC41) | 2007-2013 |
| Honda | CB650 F / FA - E,F,G,H,J | 2014-2018 |
| Honda | CBR600 F-B,C,D,E | 2011-2013 |
| Honda | CBR650 F / FA - E,F,G,H,J | 2014-2018 |
| Honda | XL600 V-J,K,L Transalp (PD06) | 1988-1990 |
| Honda | XL600 VH,VJ Transalp (PD06) | 1987-1988 |
| Honda | XL650 V Transalp (RD10/11) | 2001-2007 |
| Honda | XL700 V/VA-8,9,A,B,C,D Transalp (RD13) | 2008-2013 |
| KTM | 1050 Adventure | 2015-2016 |
| KTM | 1090 Adventure R | 2017-2018 |
| KTM | 1090 Adventure | 2017-2018 |
| KTM | 1190 Adventure R | 2013-2016 |
| KTM | 1190 Adventure | 2013-2016 |
| KTM | 1190 RC8 R Akropovic Ltd. Ed. | 2010 |
| KTM | 1190 RC8 R Red Bull Ltd Ed. | 2010 |
| KTM | 1190 RC8 R Track | 2011-2013 |
| KTM | 1190 RC8 R | 2010 |
| KTM | 1190 RC8 R | 2011-2015 |
| KTM | 1190 RC8 | 2008-2009 |
| KTM | 1190 RC8 | 2010-2011 |
| KTM | 1290 Superadventure R | 2017 |
| KTM | 1290 Superadventure R | 2018 |
| KTM | 1290 Superadventure S | 2017 |
| KTM | 1290 Superadventure S | 2018 |
| KTM | 1290 Superadventure T | 2017 |
| KTM | 1290 Superadventure T | 2018 |
| KTM | 1290 Superadventure | 2015-2016 |
| KTM | 950 LC8 Adventure S | 2004-2006 |
| KTM | 950 LC8 Adventure | 2003-2006 |
| KTM | 950 LC8 Supermoto R | 2007-2008 |
| KTM | 950 LC8 Supermoto | 2006-2009 |
| KTM | 950 Super Enduro R | 2006-2010 |
| KTM | 990 Adventure R | 2010-2013 |
| KTM | 990 Adventure S | 2006-2008 |
| KTM | 990 Adventure | 2005-2009 |
| KTM | 990 Adventure | 2010-2013 |
| KTM | 990 SM R | 2010-2014 |
| KTM | 990 SM T | 2010-2013 |
| KTM | 990 Superduke R | 2010-2011 |
| KTM | 990 Superduke R | 2012-2013 |
| KTM | 990 Superduke | 2005-2012 |
| KTM | 990 Supermoto | 2008-2010 |
| Kawasaki | 1000 Ninja H2 Carbon | 2017 |
| Kawasaki | 1000 Ninja H2 | 2015-2017 |
| Suzuki | DL650 A K7,K8,K9,L0-L8 V-Strom ABS | 2007-2018 |
| Suzuki | DL650 A L0 V-Strom GT | 2010 |
| Suzuki | DL650 A L0 V-Strom Traveller | 2010 |
| Suzuki | DL650 A L2-L5 V-Strom ABS Adventure | 2012-2015 |
| Suzuki | DL650 A L5,L6 V-Strom XT ABS - USA | 2015-2016 |
| Suzuki | DL650 A L5-L8 V-Strom XT ABS | 2015-2018 |
| Suzuki | DL650 K7,K8,K9,L0,L1 V-Strom X | 2010-2011 |
| Suzuki | DL650 K7,K8,K9,L0,L1,L2 V-Strom | 2007-2012 |
| Suzuki | DL650 SEA L0,L1,L2 V-Strom Touring - USA | 2010-2012 |
| Suzuki | GSF650 K7,K8,K9 Bandit | 2007-2009 |
| Suzuki | GSF650 L0,L1 Bandit | 2010-2011 |
| Suzuki | GSF650 S-L0 Bandit Traveller | 2010 |
| Suzuki | GSF650 SA-K7,K8,K9,L0,L1,L2,L3,L4,L5 Bandit (ABS) | 2007-2015 |
| Suzuki | GSX650 F/FA-K8,K9,L0,L1,L2,L3,L4,L5,L6 | 2008-2016 |
| Triumph | 675 Street Triple R | 2010-2016 |
| Triumph | 675 Street Triple | 2008-2016 |
| Triumph | 765 Street Triple R Low | 2018 |
| Triumph | 765 Street Triple R | 2017-2018 |
| Triumph | 765 Street Triple RS | 2017-2018 |
| Triumph | 765 Street Triple S | 2018 |
| Yamaha | TDM900 (5PS) | 2002-2013 |
| Yamaha | TDM900 A ABS (1B0) | 2005-2013 |
- X Ring four contact points greatly increasing sealing performance, keeps dirt out and maintains lubrication.
- Ultra low friction X-shaped seal rings preventing inner lubrication loss
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- ZJ (rivet) link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin. A riveting tool is required.
Gold Heavy duty drive chain from the world's leading chain manufacturer. Their patented X-Ring construction reduces friction by twisting the side plates instead of being squashed. D.I.D's sealed chains incorporate D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer than standard chains without significant wear elongation under satisfactory maintenance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | TM250 J/K/L/M - USA | 1972-1975 |
- X Ring four contact points greatly increasing sealing performance, keeps dirt out and maintains lubrication.
- Ultra low friction X-shaped seal rings preventing inner lubrication loss
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- ZJ (rivet) link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin. A riveting tool is required.
Heavy duty drive chain from the world's leading chain manufacturer. Their patented X-Ring construction reduces friction by twisting the side plates instead of being squashed. D.I.D's sealed chains incorporate D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer than standard chains without significant wear elongation under satisfactory maintenance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Aprilia | 750 Dorsoduro / ABS | 2007-2016 |
| Aprilia | 750 Dorsoduro Factory / ABS | 2010-2016 |
| Cagiva | 650 Raptor | 2001-2007 |
| Cagiva | 650 V-Raptor | 2001-2007 |
| Honda | CB400 F3S,F3T,F3V Super Four (NC31) - Japan | |
| Honda | CB750 F2-1 | 2001-2003 |
| Honda | CB750 F2-N,P,R,S,T,V,W,X,Y (RC42) | 1992-2000 |
| Honda | CB750 F2N,F2T - Japan | |
| Honda | CBR600 F-1 (OC35) | 2001 |
| Honda | CBR600 FS-1,2 Sport (PC35) | 2001-2002 |
| Honda | CBR600 RA-A,B,C,D,E,F,G (C-ABS) | 2010-2016 |
| Honda | CBR600 RA-A,B,C,D,E,F,G,H,J (C-ABS) - USA | 2009-2018 |
| Honda | CBR600 RR-3,4,5,6 (PC37) | 2003-2006 |
| Honda | CBR600 RR-3,4,5,6 - USA | 2003-2006 |
| Honda | CBR600 RR-7,8,9,A,B,C,D,E,F,G (PC40) | 2007-2016 |
| Honda | CBR600 RR-7,8,9,A,B,C,D,E,F,G,H,J - USA | 2007-2018 |
| Honda | CMX450 C Rebel - USA | 1986-1987 |
| Honda | CMX450 C Rebel | 1986-1987 |
| Honda | CMX450 Rebel | |
| Honda | NT400 J BROS - Japan | |
| Honda | NT400 K-2 BROS - Japan | |
| Honda | NT650 K Hawk GT - USA | 1988-1991 |
| Honda | NTV650 J BROS - Japan | 1988-1991 |
| Honda | NTV650 K2 BROS - Japan | 1988-1991 |
| Honda | VT750 RS Shadow - USA | 2010-2013 |
| Honda | VT750 S | 2011-2013 |
| Suzuki | GSR750 L1-L6 (ABS) | 2011-2016 |
| Suzuki | GSR750 Z (ABS) | 2016-2017 |
| Suzuki | GSX400 R3,R3C (GSX-R400) (GK71F) - Japan | 1987 |
| Suzuki | GSXS750 L5-L6 | 2015-2017 |
| Suzuki | GSXS750 Z L5-L6 | 2015-2016 |
| Triumph | 800 America (0.00) | 2003-2006 |
| Triumph | 800 Speedmaster | 2003-2005 |
| Triumph | 865 America LT | 2014-2015 |
| Triumph | 865 America | 2007-2012 |
| Triumph | 865 America | 2013-2015 |
| Triumph | 865 Speedmaster | 2006-2015 |
- X Ring four contact points greatly increasing sealing performance, keeps dirt out and maintains lubrication.
- Ultra low friction X-shaped seal rings preventing inner lubrication loss
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- ZJ (rivet) link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin. A riveting tool is required.
Gold Heavy duty drive chain from the world's leading chain manufacturer. Their patented X-Ring construction reduces friction by twisting the side plates instead of being squashed. D.I.D's sealed chains incorporate D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer than standard chains without significant wear elongation under satisfactory maintenance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
- Gold &Â Steel finish
- X-Ring contact points greatly increasing sealing performance, keeps dirt out and maintains lubrication.
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards.
- D.I.D X-Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- Split link provides easy and quick fitment.
In developing this new series, D.I.D focused on improving chain rigidity. Traditionally chain tensile strength has been used to indicate the overall strength and lock dirt out. They are expected to last at least ten times longer than standard chains without significant wear elongation under satisfactory maintenance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Betamotor | 350 Jonathan | 2001-2002 |
| Honda | CMX300 A Rebel | 2017-2018 |
| Husaberg | 350 Enduro | 1992-1995 |
| Husaberg | FC350 4 Speed | 1996-1999 |
| Husaberg | FC350 4 Speed | 2000-2001 |
| Husaberg | FC350 6 Speed | 1996 |
| Husaberg | FC350 6 Speed | 1997-1999 |
| Husaberg | FC350 6 Speed | 2000-2001 |
| Husaberg | FC400 4 Speed | 1996-1999 |
| Husaberg | FC400 4 Speed | 2000-2001 |
| Husaberg | FC400 6 Speed | 1996 |
| Husaberg | FC400 6 Speed | 1997-1999 |
| Husaberg | FC400 6 Speed | 2000-2001 |
| Husaberg | FE350 | 1996-1999 |
| Husaberg | FE350 | 2000-2001 |
| Husaberg | FE400 e | 2000-2003 |
| Husaberg | FE400 | 1996-1999 |
| Husaberg | FS450 e | 2004-2008 |
| Husaberg | MX350 | 1995 |
| Husaberg | MX499 4 Speed | 1992-1995 |
| Husqvarna | 250 CR | 1990-1991 |
| Husqvarna | 250 CR | 1992-1994 |
| Husqvarna | 250 CR | 1995-1997 |
| Husqvarna | 250 WR/CR | 1980 |
| Husqvarna | 250-260 WRK Enduro | 1990-1994 |
| Husqvarna | 350 TE | 1990-1995 |
| Husqvarna | 350 WR | 1981-1988 |
| Husqvarna | 400 WR/CR | 1981-1989 |
| KTM | 150 SX Motocross | 2008-2014 |
| KTM | 150 SX Motocross | 2013-2017 |
| KTM | 150 SX Motocross | 2018 |
| KTM | 450 SMR | 2004-2007 |
| Kawasaki | KDX420 B1 | 1981 |
| Kawasaki | KDX450 A1 | 1982 |
- Finished in Unplated SteelÂ
- Super NZ Non O-Ring Chain
- Made In Japan
- SDH pin treatment creates an extremely hard chromium carbide layer on the pin surface which increases chain life. And at the same time the pin's inner core remains soft to absorb the tremendous shock loads of triple jumps without breaking.
- Comes with full fitting instructions
- Hard Chromium Carbide Layer for increased strength and durability
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- FJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. The D.I.D chain advantage isn't just limited to light weight and superior strength. D.I.D's exclusive SDH pin treatment is another secret behind their winning performance.
- Premium DID Chain
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
- Premium DID Chain
- Gold & Gold Finish (inner and outer)
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Ducati | 600 Monster (<02961) | 1994 |
| Ducati | 600 Monster (>02962) | 1995-1998 |
| Ducati | 620 Sport | 2003 |
| Ducati | 750 Monster | 1998-2001 |
| Ducati | 900 Monster i.e. | 2002 |
- Finished in Unplated Steel
- X ring contact points greatly increasing sealing performance, keeps dirt out and maintains lubrication.
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards.
- D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for.
D.I.D motorcycle chain experts are proud to introduce this new high performance VX2 chain Series. In developing this new series, D.I.D focused on improving chain rigidity. Traditionally chain tensile strength has been used to indicate the overall strength and lock dirt out. They are expected to last at least ten times longer than standard chains without significant wear elongation under satisfactory maintenance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
- Premium DID Chain
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Aprilia | 1000 RSV Mille <<< 520 Chain Conversion | 1998-2003 |
| Aprilia | 1000 RSV4 Factory <<< 520 Chain Conversion | 2009-2014 |
| Aprilia | 1000 SL Falco <<< 520 Chain Conversion | 2000-2006 |
| Aprilia | 600 Pegaso | 1990 |
| Aprilia | 600 Tuareg SPX Paris Dakar | 1988-1990 |
| Aprilia | Moto 6.5 | 1995-1999 |
| Ducati | 620 Multistrada Dark | 2005-2006 |
| Ducati | 620 Multistrada | 2005-2006 |
| Ducati | 696 Monster | 2008-2011 |
| Ducati | 696 Monster | 2012-2014 |
| Ducati | 821 Monster Dark | 2014-2018 |
| Ducati | 821 Monster Stripe | 2014-2018 |
| Ducati | 821 Monster | 2014-2018 |
| Ducati | 906 Paso Sports | 1989 |
| Ducati | 907 I.E. | 1991-1992 |
| Ducati | 907 Paso Sports | 1990-1993 |
| Gas Gas | 515 SM | 2009 |
| Gilera | 600 Nordwest | 1992-1993 |
| Honda | CBR600 F 4i <<< 520 Chain Conversion - USA | 2001-2006 |
| Honda | CBR600 F-2,3,4,5,6,7 <<< 520 Chain Conversion | 2002-2007 |
| Honda | CBR600 F2 / F3 <<< 520 Chain Conversion - USA | 1991-1998 |
| Honda | CBR600 FX,FY <<< 520 Chain Conversion | 1999-2000 |
| Honda | CBR900 RR Fire Blade <<< 520 Chain Conversion - USA | 1993-1999 |
| Honda | CBR900 RR Fire Blade <<< 520 Chain Conversion | 1992-1999 |
| Honda | CBR900 RR Y,1,2,3 Fire Blade <<< 520 Chain Conversion | 2000-2003 |
| Honda | CBR929 RR Fire Blade <<< 520 Chain Conversion - USA | 2000-2001 |
| Honda | CBR954 RR Fire Blade <<< 520 Chain Conversion - USA | 2002-2003 |
| Honda | FX650 Vigor (RD09) | 1999-2001 |
| Honda | NX650 J Dominator (RD02) | 1988 |
| Honda | NX650 K,L Dominator (RD02) | 1989-1990 |
| Honda | XR600 RP,RR - Australia | 1993-1994 |
| Husqvarna | 511 TE | 2011-2012 |
| Kawasaki | ZR550 B1-B4 Zephyr - USA | 1990-1994 |
| Kawasaki | ZX10R (ZX1000 D6F,D7F) Ninja <<< 520 Chain Conversion | 2006-2007 |
| Kawasaki | ZX6R (ZX600 F1-F3) Ninja <<< 520 Chain Conversion | 1995-1997 |
| Kawasaki | ZX6R (ZX600 G1-G2,J1-J3) Ninja <<< 520 Chain Conversion | 1998-2002 |
| Kawasaki | ZX6R (ZX636 A1P) Ninja <<< 520 Chain Conversion | 2002 |
| Kawasaki | ZX6R (ZX636 B1,B2) Ninja | 2003-2004 |
| Kawasaki | ZX6RR (ZX600 K1,M1) Ninja | 2003-2004 |
| Kawasaki | ZX7RR (ZX750 N1-N2) Ninja <<< 520 Chain Conversion | 1996-1999 |
| MuZ | 600 Sport Cup - France | 1997-1998 |
| MuZ | 660 Scorpion Replica | 1995-1999 |
| MuZ | 660 Scorpion Sport | 1995-1999 |
| MuZ | 660 Scorpion Traveller | 1995-2002 |
| MuZ | 660 Trouper - France | 1997-1998 |
| Suzuki | DR600 S-SU,R,RU,F,G,H,J (SN41A) | 1985-1989 |
| Suzuki | GSXR750 WN,WP,WR,WS <<< 520 Chain Conversion (GR7BD) | 1992-1995 |
| Suzuki | GSXR750 WT,WV SRAD <<< 520 Chain Conversion - USA | 1996-1997 |
| Suzuki | GSXR750 WT,WV SRAD <<< 520 Chain Conversion | 1996-1997 |
| Yamaha | XJ600 N (4KF5) | 1998-2000 |
| Yamaha | YZF600R Thunder Cat <<< 520 Chain Conversion | 1996-2003 |
| Yamaha | YZF600R-T,V,W <<< 520 Chain Conversion | 2005-2007 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Daelim | 110 City Ace - Greece / SE Asia | |
| Honda | CB100 | 1976-1977 |
| Honda | CB125 S | 1975-1979 |
| Honda | CT125 - USA | 1977 |
| Honda | EZ 90 Cub | 1993-1996 |
| Yamaha | RS100 B,C - USA | 1975-1976 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | ATC125 M | 1986-1987 |
| Kawasaki | KD100 M1-M4 - USA | 1976-1979 |
| Kawasaki | KM100 A1-A7 - USA | 1976-1982 |
| Suzuki | DS80 D,F,G,H,J,K,L,M,N,P,R,S,T,V,W,X,Y,K1,K2,K3 | 1982-2003 |
| Suzuki | DS80 T,X,Z | 1980-1982 |
| Suzuki | JR80 D,F,G,H,J,K,L,M,N,P,R,S,T,V,W,X,Y,K1,K2,K3 | 1982-2003 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | LT80 H/J Quadsport | 1987-1988 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | DRZ70 K8,K9,L0-L8 | 2008-2018 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Yamaha | YT125 G,H (Tri Moto) | 1980-1981 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Kymco | 50 KXR | 2004-2007 |
| Kymco | 90 KXR | 2005-2007 |
| Kymco | 90 Maxxer | 2005-2007 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Standard motorcycle roller chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | ATC200 M | 1984-1985 |
| Honda | TLM220 RJ,RL (MD23) - Japan | |
| Honda | TRX250 R | 1988-1989 |
| Yamaha | YFM250 R-X,Y,Z,A,B,D Raptor | 2008-2013 |
| Yamaha | YFM250 RSP-X,Y,Z,A Raptor Special Edition | 2008-2011 |
| Yamaha | YFM250 RSP2-X,Y Raptor Special Edition 2 | 2008-2009 |
| Yamaha | YFS200 L,M,N,P,R,S,T,V Blaster | 1999-2006 |
| Yamaha | YFS200 U,W,A,B,D,E,F,G,H,J,K Blaster | 1988-1998 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Standard motorcycle roller chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | ATC200 S | 1984-1986 |
| Honda | ATC250 R | 1981-1982 |
| Suzuki | LT160 E K/L/M/N/P Quadrunner | 1989-1992 |
| Suzuki | LT230 E- H,J,K,L,M,N,P | 1986-1993 |
| Suzuki | LT230 S- F,G,H,J | 1985-1988 |
| Suzuki | LTF160 K2,K3,K4 Quadrunner | 2002-2004 |
| Suzuki | LTF160 M,N,P,R,S,T,V,W,X,Y,K1 | 1991-2001 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Standard motorcycle roller chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | ATC185 | 1980 |
| Honda | ATC200 E Big Red | 1982 |
| Honda | ATC200 E Big Red | 1983 |
| Honda | ATC200 | 1981-1982 |
| Honda | ATC200 | 1983 |
| Honda | ATC250 R | 1983-1984 |
| Kawasaki | KSF250 A1-A18 Mojave | 1987-2004 |
| Kawasaki | KXT250 A1,A2 Tecate | 1984-1985 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Standard motorcycle roller chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | ATC200 X | 1983-1985 |
| Honda | TRX200 Fourtrax / D Fourtrax Type II | 1990-1997 |