Best Sellers
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | Z50 A Monkey |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CM400 A - USA | 1979-1981 |
| Honda | CM400 C/E - USA | 1980-1981 |
| Honda | CM400 T - USA | 1979-1981 |
| Honda | CM400 T-A Chopper (NC01) | 1979-1980 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | XL250 (ME06) - Japan | |
| Honda | XR200 RE,RF | 1984-1985 |
| Honda | XR250 RE,RF | 1984-1985 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | XL250 (ME06) - Japan | |
| Honda | XR200 RP,RR - Australia | 1993-1994 |
| Honda | XR250 RG,RH - Australia | 1986-1987 |
| Honda | XR250 RG,RH | 1986-1987 |
| Honda | XR250 RJ,RK | 1988-1989 |
| Honda | XR500 RB,RC | 1981-1982 |
| Honda | XR500 RD,RE,RF | 1983-1985 |
| Honda | XR500 SA,SZ | 1979-1980 |
| Honda | XR600 RF,RG,RH | 1985-1987 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CRM250 K,K2,L - Japan | 1991 |
| Honda | XR250 Baja - Japan | 1997-2007 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CRF230 M-9,A | 2009-2010 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Triumph | 1200 Daytona | 1993-1996 |
| Triumph | 750 Daytona | 1993 |
| Triumph | 750 Thunderbird | 1995 |
| Triumph | 900 Adventurer | 1996-1998 |
| Triumph | 900 Adventurer | 1999-2001 |
| Triumph | 900 Daytona | 1996 |
| Triumph | 900 Legend Deluxe | 2001 |
| Triumph | 900 Legend TT | 1999-2000 |
| Triumph | 900 Speed Triple | 1994-1996 |
| Triumph | 900 Sprint FT | 1999 |
| Triumph | 900 Thunderbird Sport | 1998 |
| Triumph | 900 Thunderbird Sport | 1999-2000 |
| Triumph | 900 Thunderbird | 1995-2003 |
| Triumph | 900 Trophy | 1998 |
| Triumph | 900 Trophy | 2000-2001 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Triumph | 1200 Trophy | 2000 |
| Triumph | 1200 Trophy | 2001 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Yamaha | XT600 E (Lightweight Rear Sprocket) (4PT/4SL) | 1999-2003 |
| Yamaha | XT600 E,EC-A,B,D,E,F,G (Lightweight Rear Sprocket) - USA | 1990-1995 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Want to Gear Up / Gear Down?
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Kawasaki | KSF400 A1-A3,A6F (KFX400) | 2003-2006 |
| Suzuki | LTZ400 K3,K4,K5,K6,K7,K8 Quadsport | 2003-2008 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | XLR250 Baja - Japan | |
| Honda | XLR250 R - Japan | |
| Honda | XLR250 R3H (MD20) - Japan | |
| Honda | XLR250 R3J,R3K (MD22 >210) (MD22) - Japan | |
| Honda | XLR250 R3L,R3M,R3N,R3P,R5,R6 (MD22) - Japan |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CB400 F3S,F3T,F3V Super Four (NC31) - Japan | |
| Honda | NV400 C-J,K,L,N,P,R,V Steed (NC26) - Japan | |
| Honda | NV600 C-J Steed (PC21-100) (PC21) - Japan | |
| Honda | NV600 C-K,L,N,P,R Steed (PC21) - Japan | |
| Honda | VF400 FC - Japan | |
| Honda | VFR400 ZG,RG,RG-YA,ZH (NC21) - Japan | |
| Honda | XRV750 Africa Twin (RD07) | 1993-2003 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | VT750 RS Shadow - USA | 2010-2013 |
| Honda | VT750 S | 2011-2013 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Kymco | 150 MXer / MXU | 2002-2015 |
| Kymco | 50 MXU Reverse | 2007-2015 |
| Kymco | 50 MXU | 2004-2007 |
| Kymco | 50 MXer - Germany | 2002-2004 |
| Kymco | 50 MXer | 2002-2004 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CMX250 C,CD Rebel - USA | 1996-2016 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Daelim | 110 City Ace - Greece / SE Asia | |
| Honda | CB100 | 1976-1977 |
| Honda | CB125 S | 1975-1979 |
| Honda | CT125 - USA | 1977 |
| Honda | EZ 90 Cub | 1993-1996 |
| Yamaha | RS100 B,C - USA | 1975-1976 |
RK CLIPLINK
RK is the leading manufacturer of drive chains for motorcycles in Japan.
For more than 40 years, RK has supplied all well-known Japanese motorcycle manufacturers as original equipment.
Also in racing, RK is the first choice of many teams in MotoGP, motocross or even in the Paris-Dakar Rally.
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CB50 V Dream (AC15) - Japan | |
| Honda | CR80 RB Elsinore | 1981 |
| Honda | MCX80 SD (HC05) - Germany | 1982-1987 |
| Husqvarna | 65 TC | 2017-2018 |
| KTM | 65 SX | 1998-2002 |
| KTM | 65 SX | 2003 |
| KTM | 65 SX | 2004-2011 |
| KTM | 65 SX | 2012-2018 |
| Kawasaki | KX80 B1-B2 | 1979-1980 |
| Suzuki | FR70 | 1975-1987 |
| Suzuki | GT50 KB,KN,KX | 1977-1980 |
| Suzuki | TS50 KC,KM | 1979 |
| Suzuki | TS50 KN | 1979 |
| Suzuki | ZR50 K-N,X | 1980-1984 |
| Suzuki | ZR50 SK - Norway | 1982- |
| Suzuki | ZR50 SK-E,F,X,H | 1984-1988 |
| Suzuki | ZR50 SL - Norway | 1983- |
| Suzuki | ZR50 SL GT Chopper - France | |
| Suzuki | ZR50 X1 - Norway | 1980- |
| Suzuki | ZRS 50 RG - France | |
| Yamaha | DT50 (17W) - Japan | 1991 |
| Yamaha | DT50 MX-I,II - Norway | 1983-1987 |
| Yamaha | DT50 MX-II - Norway | 1988- |
| Yamaha | DT50 MX-S - Germany | 1986-1994 |
| Yamaha | DT50 MX-S | 1988-1995 |
| Yamaha | FS80 SE | |
| Yamaha | RD50 MX | 1981-1987 |
| Yamaha | RSX100 (RXS100) - Norway | 1984- |
| Yamaha | RZ50 - Japan |
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
Manufactured from carbon alloy steel, heat-treated and shot-peened for maximum strength and durability, Cold Forged Seamless Bush for longer chain life.Â
All RK chains are pre-stressed and pre-stretched for superior performance and minimize elongation during the life of the chain. Excellent quality and cost performance for light duty motorcycle application.
- Kills existing corrosion
- Prevents new corrosion from forming
- 'ACTIVE' long lasting, 'non-drying'
- Excellent penetrant and lubricant
- Contains NO silicon, wax, resin, tar, asphalt or Teflon
- Highly effective against salt water
- Non-Conductive
- NOT WATER SOLUBLE
Corrosion Block Grease is designed to provide maximum protection for your motorcycle under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components, strongly resists water wash out and provides superior protection against rust and corrosion. Perfect for Motorcycles maintenance, Scooters, Quads, Jet Skis and Boats.
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | TRX90 Fourtrax | 1993-2008 |
| Honda | TRX90 X | 2009-2012 |
| Kawasaki | KD80 M1-M8 | 1980-1987 |
| Kawasaki | KM90 A6 | 1977 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | DRZ70 K8,K9,L0-L8 | 2008-2018 |
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength - See product information
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | ALT50 D,E | 1983-1984 |
| Suzuki | LT50 E,F,G,H | 1984-1987 |
| Suzuki | LT50 J,K,X,Y | 1997-2000 |
- Made from high carbon Japanese steel
- Surface hardened pins with rigid bushes for high wear resistance
- Industry leading tensile strength (See Tech Spec Page) proven stronger than DID equivalent
- Split link for easy fitment and application
Power Transfer heavy duty drive chain from JT. Combining performance, strength, durability at a competitive price. Created using leading manufacturing processes and only from the highest grade of special steel alloys. Race developed for ultimate results.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | XL75 - USA | 1977-1979 |
| Honda | XL75 | 1977-1980 |
| Suzuki | FM50 A Landy - Greece | 1980-1998 |
| Suzuki | RM60 N - USA | 1979 |
| Yamaha | LB50 2M Chappy | 1986-1994 |
| Yamaha | LB50 Chappy - France | up-1983 |
- Made from high carbon Japanese steel
- Surface hardened pins with rigid bushes for high wear resistance
- Industry leading tensile strength (See Tech Spec Page) proven stronger than DID equivalent
- Split link for easy fitment and application
Power Transfer heavy duty drive chain from JT. Combining performance, strength, durability at a competitive price. Created using leading manufacturing processes and only from the highest grade of special steel alloys. Race developed for ultimate results.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | ATC70 | 1976-1981 |
| Honda | ATC70 | 1982-1985 |
| Honda | TRX70 | 1986-1987 |
- Superb streetbike pad
- Totally ECO friendly
- Can replace organic or sintered
- TÜV and ECE R 90 approved
- Low dust and disc abrasion
UK made using high tech ECO friendly pad compound that delivers fingertip stopping power. Suitable for all road bikes and scooters, the E327 grade compound has been a best seller for over 15 years with over 40 million sets sold worldwide. Fully TÜV tested and now ECE R 90 brake safety test appoved, these pads were rated by German Motorrad Magazine as a top quality organic pad and now proven suitable even as a sintered pad replacement. NEW FOR 2015 all EBC organic pads are built on backing plates made with the patented Nucap® NRS® hook retention system guaranteeing zero chance of pad debonding after extended use or corrosion. Not for race or track use.
- Versatile boxed breaker and riveting kit for both cam chains and motorcycle drive chains
- Will break chains up to 632 size. (It is recommended to first grind the rivet head on 520 and larger chains)
- Suitable for all chain types (DID, JT, IRIS, etc.)
- Compact and easy to assemble
- For riveting hollow pin connecting links
- Housed in heavy duty High-density polyethylene (HDPE) case
- Multiple pins for breaking different chain pitches
- Kit includes press plates
- Comes with full instructions
- Made from Steel
Professional Chain Breaker Press & Riveting Kit
This heavy duty professional chain breaker and riveting kit is perfect for home use to break and rivet join a wide selection of drive, cam, O-ring and Z-ring chains. Suitable for use with a wide range of chain pitches including 415, 420, 428, 520, 525, 530, 532, 630 or 632 chain sizes. Made from high quality steel to ensure this tool can be used for years, not just one time.
Includes:
- Tool body
- Tool handle
- Push bolt
- Push bolt lever
- Alignment bolt
- 2.2mm breaking tip
- 2.9mm breaking tip
- 3.8mm breaking tip
- Riveting tip
- Tip spring
- Small riveting anvil
- Large riveting anvil
- Upper tip guide
- Lower tip guide
- Carrying box
This 42-tooth rear sprocket is an OEM final-drive component for the Light Bee platform, providing lower overall gearing and stronger drive compared with smaller tooth counts.
Features:
- OEM pattern for direct fitment to the Light Bee platform
- Compatible with 420-pitch chain systems
Brand: Sur-Ron
Specifications:
- Type: Rear wheel sprocket (final drive)
- Size: 42 teeth
- Chain pitch: 420
- Weight: 0.5 kg
Vehicle Fitments -
SURRON LIGHT BEE X
SURRON LIGHT BEE L1E
Renthal is a global leader in the manufacturing, design and sales of motorcycle, ATV and cycle parts and accessories. The current parts portfolio covers a wide range of products for motocross, quad bikes, road bikes and trials bikes. These market leading products include handlebars, grips, bar mounts, levers, hand guards, chainwheels, chain and brake pads. Our cycle product portfolio includes handlebars, stems, grips and chainrings. Renthal is a global brand, but the manufacturing heart is in Manchester, UK.
Renthal Grip Glue is a highly developed grip glue, specially formulated to give a secure bond without damaging the grip. This allows for maximum adhesion between your machine and grips without compromise.
Features:
- A highly developed grip glue
- Special Formula
- Secure bond without damage
Features:
- Split connection type
- Quick and easy to install
- Genuine DID link
- Made in Japan
DID is the largest and most respected supplier in the world of motorcycle chains for both OEM and aftermarket applications. Manufacturers including Honda, Yamaha, Suzuki, Kawasaki, BMW, Ducati, Harley Davidson, Husqvarna, KTM, MV Agusta, Piaggio, and many others, firmly believe in the high quality offered by DID.
This heavy duty split link is manufactured to a very high quality, fits all DID 520 D chains and may also fit 520 pitch chains from other brands. It is easy to install and doesn't take an expert to fit so you can be back on your bike in a short amount of time.
- Finished in Unplated Steel.
- X ring contact points greatly increasing sealing performance, keeps dirt out and maintains lubrication.
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards.
- D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- Split (ZJ) link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for.
D.I.D motorcycle chain experts are proud to introduce this new high performance VX3 chain Series. In developing this new series, D.I.D focused on improving chain rigidity. Traditionally chain tensile strength has been used to indicate the overall strength and lock dirt out. They are expected to last at least ten times longer than standard chains without significant wear elongation under satisfactory maintenance.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Aprilia | 650 Pegaso Cube | 2000 |
| Aprilia | 650 Pegaso Factory | 2007-2009 |
| Aprilia | 650 Pegaso Strada | 2005-2009 |
| Aprilia | 650 Pegaso Trail | 2007-2009 |
| Aprilia | 650 Pegaso Tucsany Tibet | 2004 |
| Aprilia | 650 Pegaso i.e. | 2001-2004 |
| Aprilia | 650 Pegaso | 1992-1997 |
| Aprilia | 650 Pegaso | 1998-1999 |
| BMW | F650 Funduro | 1996-2000 |
| BMW | F650 ST Strada | 1998-2000 |
| BMW | F650 | 1994-1995 |
| Cagiva | 350 T4 E/R | 1987-1991 |
| Cagiva | 350 W12 Trail | 1993-1996 |
| Cagiva | 500 T4 E/R | 1987-1990 |
| Ducati | 750 Lagunaseca | 1987 |
| Ducati | 750 Santa Monica SS | 1987-1988 |
| Honda | CBR600 F4 <<< 520 Chain Conversion - USA | 1999-2000 |
| Honda | CBR600 FM,FN,FP,FR,FS,FT,FV,FW <<< 520 Chain Conversion | 1991-1998 |
| Honda | FMX650 (RD12) | 2005-2008 |
| Honda | NX650 M,N,P,R Dominator (RD02) | 1991-1994 |
| Honda | NX650 S,T,V,W,X,Y,R-1 Dominator (RD08) | 1995-2001 |
| Honda | SLR650 - France | 1997-1998 |
| Honda | SLR650 V,W (RD09) | 1997-1998 |
| Honda | SLR650 X,Y | 1999-2001 |
| Honda | XR600 RF,RG,RH | 1985-1987 |
| Honda | XR600 RM,RN,RP,RR,RS,RT,RV,RW,RX,RY | 1991-2000 |
| Honda | XR650 L-J | 2018 |
| Honda | XR650 L-P,R,S,T,V,W,X,Y,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F,G,H | 1993-2017 |
| Honda | XR650 R-Y,1,2,3,4.5,6,7 | 2000-2007 |
| Husqvarna | 449 TC | 2011-2012 |
| Husqvarna | 510 SM R | 2005 |
| Husqvarna | 510 SM R | 2006-2010 |
| Husqvarna | 630 SM IE | 2010 |
| Husqvarna | 630 SM | 2010 |
| KTM | 350 Freeride | 2012-2015 |
| KTM | 350 Freeride | 2016-2017 |
| Kawasaki | EN500 C1,C2 Classic - France | 1996-1997 |
| Kawasaki | EN500 C1-C10 Vulcan | 1996-2005 |
| Kawasaki | EN500 C6F,C7F,C8F,C9F Vulcan 500 Ltd | 2006-2009 |
| Kawasaki | KDX400 A1 - USA | 1979 |
| Kawasaki | KLE500 A7-A14 | 1997-2005 |
| Kawasaki | KLE500 B6F,B7F | 2006-2007 |
| Kawasaki | KLX300 A2,A3,A4,A5,A6,A7 (KLX300R) | 1997-2002 |
| Kawasaki | KLX300 A8,A9,A10,A6F,A7F (KLX300R) | 2003-2007 |
| Kawasaki | KLX300 R B1 - France | 1997 |
| Kawasaki | KLX650 R A1,A2,A3,D1 | 1993-1996 |
| Kawasaki | ZX6R (ZX636 C1,C6F,D6F) Ninja | 2005-2006 |
| Kawasaki | ZX6RR (ZX600 N1,N6F) Ninja | 2005-2006 |
| Kawasaki | ZXR400 H2,L1-L9 (ZX-4) | 1988-2002 |
| MuZ | 660 Mastiff | 1997-2003 |
| MuZ | 660 Tour - France | 1997-1998 |
| Suzuki | DR350 L,M,N,P (Off Road Version) | 1990-1993 |
| Suzuki | DR350 R,S,T,V,W,X (Off Road Version) | 1994-1999 |
| Suzuki | DR350 SE-R,S | 1994-1995 |
| Suzuki | DR350 SE-X | 1999 |
| Suzuki | DR370 C,N - USA | 1978-1979 |
| Suzuki | DRZ400 SM-K5,K6,K7,K8,K9,L0-L8 | 2005-2018 |
| Suzuki | GS400 E (GK54A) - Japan | |
| Suzuki | GS500 E-X,Y,K1,K2,K3,K4,K5,K6,K7 | 1999-2007 |
| Suzuki | GS500 F-K4,K5,K6,K7,K8,K9,L0 | 2004-2010 |
| Suzuki | GS500 H K7 - USA | 2007 |
| Suzuki | GSXR600 K1,K2,K3,K4,K5 <<< 520 Chain Conversion | 2001-2005 |
| Suzuki | GSXR750 K4,K5 Fuel Injection <<< 520 Chain Conversion - USA | 2004-2005 |
| Suzuki | GSXR750 K4,K5 Fuel Injection <<< 520 Chain Conversion | 2004-2005 |
| Suzuki | GSXR750 WW,X Fuel Injection SRAD <<< 520 Chain Conversion | 1998-1999 |
| Suzuki | GSXR750 Y,K1-K3 Fuel Injection SRAD <<< 520 Chain Conversion | 2000-2003 |
| Suzuki | RM400 N,T | 1979-1980 |
| Yamaha | FZ400 (4YR) - Japan | 1997 |
| Yamaha | SZR660 | 1996-1998 |
| Yamaha | TT600 E - France | 1996-1997 |
| Yamaha | TT600 E | 1996-2000 |
| Yamaha | XJ600 N (4KE,4MB) | 1995-2003 |
| Yamaha | XJ600 S-D,E,F,G,H,J,K,L,M,N,P,R Diversion (4BRA,B) | 1992-2003 |
| Yamaha | XJ600 S-L,M Diversion (4DG) | 1999-2000 |
| Yamaha | XJ600 S/SC- D,E,F,G,H,J,K Seca II - USA | 1992-1998 |
| Yamaha | XJR400 - Japan | 1993-2008 |
| Yamaha | XT660 R (5VK) | 2004-2015 |
| Yamaha | XT660 X Super Motard (1D2,10S) | 2004-2015 |
| Yamaha | XTZ660 Tenere (3YF) | 1991-1995 |
| Yamaha | XTZ660 Tenere | 1996-1998 |
| Yamaha | XTZ660 Z Tenere (11D) | 2008-2015 |
| Yamaha | XTZ660 Z Tenere ABS (11D) | 2011-2015 |

