Best Sellers
- Finished in Unplated Steel
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Heavy Duty, higher tensile strength than standard 428 DID chain, above Japanese OEM standards
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation.
Heavy duty drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CB125 TDC,TDE - Europe | 1982-1988 |
| Honda | CM125 C Custom | 1982-1997 |
| Honda | CT125 C | 1982 |
| Honda | TL125 S/K2 - USA | 1973-1976 |
| Honda | XL125 K2,K3,SZ,SB,SC,SD - Australia | 1977-1983 |
| Kawasaki | KX80 G1-G2,H2 >>> 428 Chain Conversion | 1986-1987 |
| Kawasaki | KX80 L3 >>> 428 Chain Conversion | 1990 |
| Kawasaki | KX85 A1-ADF,CEF-CJF >>> 428 Chain Conversion | 2001-2018 |
| Kymco | 125 Spike - Greece / SE Asia | |
| Suzuki | GP100 C,UC | 1978-1980 |
| Suzuki | GP100 N,UN | 1979-1980 |
| Suzuki | GP100 UX,X,D,ED | |
| Suzuki | GT100 - Norway | 1976 |
| Suzuki | RM80 XG,XH,XJ >>> 428 Chain Conversion | 1986-1988 |
| Suzuki | TS100 ERZ | 1982-1984 |
| Suzuki | TSX80 E,G (TS80X) | 1984-1985 |
| Yamaha | DT80 LC1 - Germany | 1983-1984 |
| Yamaha | DT80 LC1,LC2 | |
| Yamaha | SR125 (3MW8) | 1995-2003 |
| Yamaha | SR125 - France | up-1982 |
| Yamaha | SR125 - Spain | 1982-1997 |
| Yamaha | SR125 SE (3MW) | 1980-1994 |
| Yamaha | TY125 | 1989 |
| Yamaha | XT125 (2YE) - France | 1988-1990 |
| Yamaha | XT125 (2YU) - France | 1991-1993 |
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | DR-Z250 K1,K2,K3,K4,K5,K6,K7 | 2001-2007 |
| Suzuki | DR250 L,M,N,P Off Road | 1990-1993 |
| Suzuki | DR250 S-L,M,N,P | 1990-1993 |
| Suzuki | GSF250 - Japan | 1995 |
| Suzuki | RM250 H,J | 1987-1988 |
| Suzuki | RM250 K,L,M,N,P,R,S,T,V | 1989-1997 |
| Suzuki | RM250 K1/K2/K3 - USA | 2001-2003 |
| Suzuki | RM250 K4,K5,K6,K7,K8,K9,L0,L1 | 2004-2011 |
| Suzuki | RM250 L2 | 2012 |
| Suzuki | RM250 W | 1998 |
| Suzuki | RM250 X | 1999 |
| Suzuki | RM250 Y,K1,K2,K3 | 2000-2003 |
| Suzuki | RMX250 K,L,M,N,P,R,S,T,V,W,X,Y,K1 | 1989-2001 |
| Suzuki | TSX250 LC (TS250 XE) - Australia | 1985 |
| Suzuki | TSX250 LC (TS250X-E,F,G,H,J,K) (SJ11D) | 1985-1990 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| KTM | 1190 RC8 R Track | 2011-2013 |
| KTM | 1190 RC8 R | 2011-2015 |
| KTM | 1190 RC8 | 2010-2011 |
| KTM | 990 Superduke R | 2010-2011 |
| KTM | 990 Superduke R | 2012-2013 |
| KTM | 990 Superduke | 2005-2012 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | GSXR750 F (GR75A) | 1985 |
| Suzuki | GSXR750 G,HG,H,XH (GR75A) | 1986-1987 |
| Suzuki | GSXR750 J (GR77C) - Japan | 1988 |
| Suzuki | GSXR750 R (GSX-R750) (GR71F) - Japan | 1987 |
| Suzuki | GSXR750 R2,RH,RR (GSX-R750) (GR71G) - Japan | 1987 |
| Suzuki | RF600 RT,RV | 1996-1997 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Suzuki | TSR125(TS125R-L/R) <<< 520 Chain Conversion (SF15A) | 1990-1994 |
| Suzuki | TSR200 (TS200 RM,RP) (SH12A) | 1990-1992 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | XL650 V Transalp (RD10/11) | 2001-2007 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Gilera | 600 RC | 1989-1992 |
| Honda | CBR250 FG,FG-YA - Japan | |
| Honda | VT250 Xelvis (MC25) - Japan | |
| Honda | XL500 R Pro Link | 1982 |
| Yamaha | WR250 R-X,Y,Z,A,B,D,E,F,G,H,J (32D5/B) | 2008-2018 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Yamaha | XT250 X Serrow (3C5) - Japan | |
| Yamaha | XT250 X,Y,Z,A,B,D,E,F,G,H,J | 2008-2018 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Kawasaki | ZX10R (ZX1000 C1-C2) Ninja | 2004-2005 |
| Kawasaki | ZX10R (ZX1000 JBF,JCF,JDF,JEF,JFF) Ninja | 2011-2015 |
| Kawasaki | ZX10R (ZX1000 KBF,KCF,KDF,KEF,KFF) Ninja ABS | 2011-2015 |
| Kawasaki | ZX10R (ZX1000 RGF,RGFA,RHF,RHFA) Ninja | 2016-2017 |
| Kawasaki | ZX10R (ZX1000 RHFA) Ninja KRT ABS | 2016-2017 |
| Kawasaki | ZX10R (ZX1000 SGF,SGFA,SHF,SHFA,SJF,SJFA) Ninja ABS | 2016-2018 |
| Kawasaki | ZX10R SE (ZX1002 CJF) | 2018 |
| Kawasaki | ZX10RR (ZX1000 ZHF,ZJF) Ninja | 2017-2018 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Rubber cushion to reduce operational noise and extent chain and sprocket life
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Rubber cushioned sprockets have been widely used by the major Japanese motorcycle manufacturers since early 1990s to dampen the chain impact on the teeth of the front sprocket. JT Sprockets has now released these same sprockets to the after market. Quality, design and OEM proven technology are the same as used for what is supplied to the motorcycle manufacturers and genuine replacement parts.
Unplated steel motorcycle drive chain from the world's leading chain manufacturer. Made to O.E.M spec and designed for high performance motorcycles. DID 415 S is affordable, durable and reliable making it the leading choice in the motorcycle industry for light applications.
Features:
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Hard Chromium Carbide Layer for increased strength and durability
- RJ clip/split type connecting link. Its cover-plate is designed for a slip fit on to the pins to enable easy installation
- Combines excellent quality with low cost
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Beta | Minitrial 50 | 2003-2008 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
New Generation Hyper Performance RK-XW Sealed Chain
RKs flagship model.
The ZXW Series were developed to meet the spec of the latest models of extreme superbikes and hyperbikes.
XW-Ring seals which have 2 lubrication pools and 3 contact lips, a triple barrier structure to further seal the lubrication and prevent debris to enter the chain. No other chain currently on the market has these features.
Designed to be the strongest, long-lasting premium quality XW-Ring equipped chain available on the todays market, with the highest tensile strength of RK series and high rigidity for instant response on acceleration.
- Hypersport
- General Street Use
- Road Racing Use
RK currently has five types of sealed-ring chains and each has its own features and benefits.
After several years of development, RK produced the XW seals which drastically improved the chain life and performance.
As racing expanded into several different genres, RK added the ultra thin U-Ring and UW-Ring.
Each seal is specifically designed for a particular use to provide the ultimate in rotating efficiency while providing longer wear life.
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Premium DID Chain Finished in Unplated Steel
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Ducati | 1103 Panigale V4 Speciale | 2018 |
| Ducati | 1103 Panigale V4 | 2018 |
| Ducati | 1103 Panigale V4S | 2018 |
| Ducati | 950 Multistrada | 2017-2018 |
| Honda | NTV400 BROS - Japan | |
| Honda | VRX400 T Roadster (NC33) - Japan | |
| Honda | XL400 V Transalp - Japan | 1992-1998 |
| Honda | XL400 V-J,K,L Transalp (ND06) - Japan | 1988-1991 |
| Kawasaki | Z900 (ZR900 AHF,DJF) | 2017-2018 |
| Kawasaki | Z900 ABS (ZR900 BHF,BJF) | 2017-2018 |
| Kawasaki | ZX10R (ZX1000 RGF,RGFA,RHF,RHFA) Ninja | 2016-2017 |
| Kawasaki | ZX10R (ZX1000 RHFA) Ninja KRT ABS | 2016-2017 |
| Kawasaki | ZX10R (ZX1000 SGF,SGFA,SHF,SHFA,SJF,SJFA) Ninja ABS | 2016-2018 |
| Kawasaki | ZX10R SE (ZX1002 CJF) | 2018 |
| Kawasaki | ZX10RR (ZX1000 ZHF,ZJF) Ninja | 2017-2018 |
| Suzuki | GSF400 L,M,N Bandit (GK75B) | 1990-1992 |
| Suzuki | GSF400 P,R Bandit | 1993-1994 |
| Suzuki | GSR600 B Yoshimura | 2010 |
| Suzuki | GSR600 K6,K7,K8,K9,L0 | 2006-2010 |
| Suzuki | GSX400 F-J,K,AK,L (GK74A) - Japan | 1988-1990 |
| Suzuki | GSX400 R,RC,R2 (GSX-R400) (GK71B) - Japan | 1985 |
| Suzuki | GSXR600 K6,K7,K8,K9,L0 | 2006-2010 |
| Suzuki | GSXR600 L1,L2,L3,L4,L5,L6,L7,L8 | 2011-2018 |
| Suzuki | GSXR600 Moto GP | 2016 |
| Suzuki | GSXS750 L7-L8 | 2018 |
| Suzuki | GSXS750 Z L7 | 2017 |
| Suzuki | GSXS750 Z L8 | 2018 |
| Suzuki | RF400 - Japan | |
| Suzuki | SV650 A/SA-K7,K8,K9,L0 (ABS) | 2007-2010 |
| Yamaha | FZ10 H/HC - USA | 2017 |
| Yamaha | MT10 SP | 2017 |
| Yamaha | MT10 | 2016-2017 |
| Yamaha | TDM850 (3VD) | 1991-1995 |
| Yamaha | TDM850 (4TX) | 1999-2001 |
| Yamaha | TDM850 (4TXL) | 1996-1998 |
| Yamaha | YZF R1 60th Anniv. Ed. <<< 520 Chain Conversion | 2016 |
| Yamaha | YZF R1 60th Anniversary Edition | 2016 |
| Yamaha | YZF R1 M | 2015-2017 |
| Yamaha | YZF R1 S <<< 520 Chain Conversion | 2016 |
| Yamaha | YZF R1 S | 2016 |
| Yamaha | YZF R1 | 2015-2017 |
| Yamaha | YZFR6 (13S,1JS,2CX) | 2006-2018 |
| Yamaha | YZFR6 50th Anniversary Edition | 2012 |
| Yamaha | YZFR6 60th Anniversary Edition | 2016 |
- Premium DID Chain Finished in Unplated SteelÂ
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CBF1000 B,C,D,E,F | 2011-2015 |
| Honda | CBF1000 F- GT | 2016 |
| Honda | CBF1000 F- | 2016 |
| Honda | CBF1000 F-B,C,D,E,F | 2011-2015 |
| Honda | CBF1000 F/FA-6,7,8,9,A (SC58) | 2006-2010 |
| Honda | CBF1000 FS-A (ABS) | 2010 |
| Honda | VF750 F | 1996 |
| Kawasaki | H2 A,B,C 750 | 1972-1975 |
| Suzuki | GSX1250 F / FA L0-L6 | 2010-2016 |
| Suzuki | GSX1250 FA Z | 2016 |
| Suzuki | GSX1250 FA-L1 ST | 2011 |
| Triumph | 1050 Tiger Sport | 2014-2016 |
| Yamaha | YZF R1 (14B,1KB) | 2009-2014 |
| Yamaha | YZF R1 World GP 50th Anniversary Edition | 2012 |
| Yamaha | YZFR1 LE - USA | 2010 |
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
- Premium DID Chain Finished in Unplated SteelÂ
- 40% Greater Wear Resistance (Compared with Original X-Ring)
- Made In Japan with full warranty
- Comes with free D.I.D Racing decal
- D.I.D's X-Ring chain is designed for high performance motorcycles and Quads. Their patented X-Ring construction creates a chain that is both low in friction and high in wear resistance.
- D.I.D's sealed chains incorporate uniquely designed seal-rings which seal D.I.D's special "V" grease in the pin/bushing area and lock dirt out. They are expected to last at least ten times longer, produce 50% less friction and have up to 100% longer wear life than standard chains without significant wear elongation under satisfactory maintenance.
- Proven high tensile strength (8120lbs), above Japanese OEM standards. D.I.D X Ring has the greatest wear resistance of any other type of O-Ring or non O-Ring chain.
- Engineered for strength with solid rollers, high cylindrical & roundness accuracy and made from special alloy steel.
- ZJ link provides the same durability and resistance to fatigue as exhibited by regular riveted links of chain. This race developed link will be fitted to all machines with sealed ring chains, riveted connection to make the chain endless is recommended for maximum strength and safety achieved by a unique design of shouldered pin.
- Chain Rivet & Breaking Tools Available from our shop if you wish to modify the length of your chain.
D.I.D has redesigned the shape of the X-Ring to maximize wear resistance of the new 520ZVM-X, 525ZVM-X and 530ZVM-X. chains. These two models have also been beefed up in tensile strength to make them the ultimate chains for today s high performance sport and sport touring motorcycles.
The new ZVM-X-Ring retains all the low friction, high performance characteristics of the standard X-Ring while providing a significant increase in wear resistance and overall life of the chain.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Cagiva | 1000 Raptor | 2001-2006 |
| Cagiva | 1000 V-Raptor | 2001-2006 |
| Cagiva | 650 Alazzurra GT Sports | 1986-1988 |
| Cagiva | 650 Elefant Trail | 1985-1987 |
| Ducati | 900 S2 / MHR | 1983-1985 |
| Honda | CB1100 F (SC11) | 1983 |
| Honda | CB450 SC Nighthawk - USA | 1982-1986 |
| Honda | CB650 SC Night Hawk | 1980-1981 |
| Honda | CB650 SC Nighthawk - USA | 1982 |
| Honda | CB750 C - USA | 1980-1982 |
| Honda | CB750 CA,CB,CDB Custom - Japan | |
| Honda | CB750 Custom - France | |
| Honda | CB900 Bol d Or | 1979-1982 |
| Honda | CB900 F,F2-A,B,C,D | 1979-1984 |
| Honda | VTR1000 SP-2 (SC45) | 2002-2006 |
| Kawasaki | GPZ400 (KZ400M) - Germany | 1983 |
| Kawasaki | KH500 - France | 1972-1975 |
| Kawasaki | KH500 A1,H1,D,E,F - USA | 1973-1976 |
| Kawasaki | KH500 | 1972-1975 |
| Kawasaki | KZ750 B1/B2/B3/B4 - USA | 1976-1979 |
| Kawasaki | KZ750 G1 (LTD) - USA | 1980 |
| Kawasaki | KZ750 M1 (CSR) - USA | 1982 |
| Kawasaki | Z750 B1-B4,Y1,Y2,LTD (2 Cylinders) | 1978-1982 |
| Suzuki | GR650 X-D,E,F (GP51A) | 1983-1985 |
| Suzuki | GS650 E X/Z - USA | 1981-1982 |
| Suzuki | GS650 E,S,XE - France | |
| Suzuki | GSXR750 F (GR75A) | 1985 |
| Suzuki | GSXR750 J (GR77C) - Japan | 1988 |
| Suzuki | GSXR750 L,M (GR7AC) - Japan | 1990-1991 |
| Suzuki | GSXR750 R (GSX-R750) (GR71F) - Japan | 1987 |
| Suzuki | GT550 A,B | 1976-1977 |
| Suzuki | GT750 J,K | 1972-1973 |
| Suzuki | GT750 K,L,M,A,B - USA | 1973-1977 |
| Suzuki | RG500 Gamma (HM31A) | 1986-1989 |
| Triumph | 1050 Speed Triple | 2005-2011 |
| Triumph | 1050 Sprint ST | 2005-2011 |
| Triumph | 955i Daytona | 1999-2001 |
| Triumph | 955i Daytona | 2001-2002 |
| Triumph | 955i Daytona | 2002 |
| Triumph | 955i Daytona | 2003-2006 |
| Triumph | 955i Daytona | 2004 |
| Yamaha | FJ600 L,LC,N,NC - USA | 1984-1985 |
| Yamaha | FZR500 H,M,N | 1989-1990 |
| Yamaha | FZR600 D,E (3HE) | 1992-1993 |
| Yamaha | FZR600 R/RC-A,B,D,E,F,G,H,J,K,L - USA | 1990-1999 |
| Yamaha | FZR600 W,A,B (3RG,3RH) | 1989-1991 |
| Yamaha | FZX750 | 1986-1997 |
| Yamaha | XJ600 (51H,51J) | 1984-1985 |
| Yamaha | XJ600 H,N | 1989-1990 |
| Yamaha | XJ600 | 1986-1988 |
| Yamaha | XJ600 | 1991-1992 |
| Yamaha | XS250 Alloy Wheel | 1979-1980 |
| Yamaha | XS250 C Spoke Wheel | up-1978 |
| Yamaha | XS500 A,B Spoke Wheel | 1975-1977 |
| Yamaha | XS500 C,D,E - USA | 1976-1978 |
| Yamaha | XS500 D Alloy Wheel | 1978-1980 |
| Yamaha | YZF750 R <<< 530 Chain Conversion | 1993-1997 |
Features:
- Induction Hardened ZBK Sprocket
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Finished In Black Matte
- Teeth Induction Hardened to 38-50 HRC
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Yamaha | XJR1200 - Japan | 1998-2002 |
| Yamaha | XJR1200 <<< 530 Chain Conversion (4PU/4RB) | 1995-1998 |
| Yamaha | XJR1200 R - Japan | 1998-2002 |
| Yamaha | XJR1200 SP - Japan | 1998-2002 |
| Yamaha | XJR1300 (5EA) | 1999-2001 |
| Yamaha | XJR1300 - Japan | 1998-2002 |
| Yamaha | XJR1300 SP (5EA) | 1999-2001 |
Features:
- Induction Hardened ZBK Sprocket
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Finished In Black Matte
- Teeth Induction Hardened to 38-50 HRC
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Yamaha | XT660 R (5VK) | 2004-2015 |
| Yamaha | XT660 X Super Motard (1D2,10S) | 2004-2015 |
| Yamaha | XTZ660 Z Tenere (11D) | 2008-2015 |
| Yamaha | XTZ660 Z Tenere ABS (11D) | 2011-2015 |
Features:
The new standard in steel rear motocross sprockets. A unique self-cleaning design keeps the contact area clean from dirt and mud while significantly reducing weight. Made from heat-induction hardened C45 steel which lasts up to six times longer than a 7075 aluminium sprocket and greatly extends chain life.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Yamaha | WR250 F-A,B,D,E,F,G,H,J (Off Road Version) - USA | 2011-2019 |
| Yamaha | WR250 F-F,G,H,J (Off Road Version) (2GB) | 2015-2018 |
| Yamaha | WR250 F-L,M | 1999-2000 |
| Yamaha | WR250 F-W,X,Y,Z (Off Road Version) (5UMU/W) | 2007-2010 |
| Yamaha | WR250 FN (Enduro Version) | 2001 |
| Yamaha | WR400 F-L,M,N | 1999-2001 |
| Yamaha | WR426 F-N,P | 2001-2002 |
| Yamaha | WR450 F-R,S,T,V (5TJ6) | 2003-2006 |
| Yamaha | WR450 F-W,X,Y | 2007-2009 |
| Yamaha | WR450 F-Z,A,B,D,E,F,G,H,J,K (5TJU/W) - USA | 2010-2019 |
| Yamaha | YZ250 F-B,D,E,F,G,H,K,L,M - USA | 2012-2021 |
| Yamaha | YZ250 F-E,F,G,H,J,K,L,M (1SM) | 2014-2021 |
| Yamaha | YZ250 F-G 60th Anniversary Edition | 2016 |
| Yamaha | YZ250 L,M,N | 1999-2001 |
| Yamaha | YZ250 R,S - USA | 2003-2004 |
| Yamaha | YZ250 T,V,W,X,Y,Z,A1,B1,D2,E2,F2,G2,H2,J2,K2 (1P8,1SS) | 2005-2019 |
| Yamaha | YZ250 X-G,H,J,K,L,M - USA | 2016-2021 |
| Yamaha | YZ450 FX-G,H,J,K,L1,M | 2016-2021 |
| Yamaha | YZ125 X-L,M | 2020-2021 |
| Yamaha | YZ125 X-L,N | 2022 |
| Yamaha | YZ250 L2,M2 | 2020-2021 |
| Yamaha | YZ250 N2 | 2022 |
| Yamaha | YZ250 N2ME Monster | 2022 |
| Yamaha | YZ250 | 2023 |
| Yamaha | YZ250 F | 2022-2023 |
| Yamaha | YZ250 F-NL (USA) | 2022 |
| Yamaha | YZ250 FMME Monster | 2021-2022 |
| Yamaha | YZ250 X-N (USA) | 2022 |
| Yamaha | WR450 F-L (USA) | 2020 |
| Yamaha | WR450 F-M | 2021 |
| Yamaha | WR450 F-N | 2022 |
| Yamaha | YZ450 FX-N (USA) | 2022 |
- Rubber cushion to reduce operational noise and extent chain and sprocket life
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Rubber cushioned sprockets have been widely used by the major Japanese motorcycle manufacturers since early 1990s to dampen the chain impact on the teeth of the front sprocket. JT Sprockets has now released these same sprockets to the after market. Quality, design and OEM proven technology are the same as used for what is supplied to the motorcycle manufacturers and genuine replacement parts.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Aprilia | 1200 Dorsoduro / V4R ABS | 2011-2016 |
| Aprilia | 750 Dorsoduro / ABS | 2007-2016 |
| Aprilia | 750 Dorsoduro Factory / ABS | 2010-2016 |
| Aprilia | 750 SL Shiver / ABS | 2007-2016 |
| Aprilia | 750 SL Shiver GT / ABS | 2007-2016 |
- Gold & Silver finish
- SUPER Heavy Duty
- Ultra low friction X-shaped seal rings preventing inner lubrication loss
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards and DID Equivalent
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Rivet type connecting link for maximum security and safety
Top of the range ultimate chain from JT. Premium quality and performance at a competitive price. Advanced Power Transfer X Ring super heavy duty drive chain from JT. JT X Ring seals offer far superior sealing than conventional O ring chains whilst drastically improving power transfer due to reduced friction. 4 pin riveting for superior strength against high lateral forces. Race developed for improved overall strength, performance and durability.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | VLX750 Shadow (RC44) - Greece | |
| Honda | VT750 C Shadow | 2004-2007 |
| Honda | VT750 C,CD Shadow | 1998-2003 |
| Honda | VT750 C2 Shadow | 2000-2003 |
| Honda | VT750 CD2 Shadow Deluxe | 1998-2003 |
| Honda | VT750 DC Black Widow | 2000-2003 |
| Honda | VT750 DC Shadow Spirit | 2001-2007 |
| Triumph | 800 Tiger | 2011-2016 |
| Yamaha | FZ8 N/NA (39P) | 2010-2015 |
| Yamaha | FZ8 S/SA Fazer 8 (42P) | 2010-2015 |
- Silver & Silver finish
- Ultra low friction X-shaped seal rings preventing inner lubrication loss
- Pre-lubricated at factory, ensuring low friction and maximum durability
- Proven high tensile strength, above Japanese OEM standards and DID Equivalent
- Solid bushes for enhanced distortion resistance from repetitive shock loading
- Rivet type connecting link for maximum security and safety
Advanced Power Transfer X Ring heavy duty drive chain from JT. JT X Ring seals offer far superior sealing than conventional O ring chains whilst drastically improving power transfer due to reduced friction. 4 pin riveting for superior strength against high lateral forces. Race developed for improved overall strength, performance and durability.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | VLX750 Shadow (RC44) - Greece | |
| Honda | VT750 C Shadow | 2004-2007 |
| Honda | VT750 C,CD Shadow | 1998-2003 |
| Honda | VT750 C2 Shadow | 2000-2003 |
| Honda | VT750 CD2 Shadow Deluxe | 1998-2003 |
| Honda | VT750 DC Black Widow | 2000-2003 |
| Honda | VT750 DC Shadow Spirit | 2001-2007 |
| Triumph | 800 Tiger | 2011-2016 |
| Yamaha | FZ8 N/NA (39P) | 2010-2015 |
| Yamaha | FZ8 S/SA Fazer 8 (42P) | 2010-2015 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Husqvarna | 250 FE - USA | 2018 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CRF125 FB-F,G,H,J | 2015-2018 |
Features:
- Fully heat treated for higher wear resistance
- Meet or exceed Japanese OEM standards
- Optimum design for light weight and strength
- Perfectly finished in zinc or black enamel coating
Made by JT Sprockets, world leading aftermarket sprocket manufacturer for over 30 years. JT Sprockets offer an unbeatable combination of quality, durability, and price. JT Drive sprockets are exclusively made from the finest Japanese ultra-durable high carbon C49 Steel or SCM415 Chromoly Steel Alloy.
Compatible Bikes:
| Manufacturer | Model | Year |
|---|---|---|
| Honda | CRF125 F-E,F,G,H,J | 2014-2018 |